Apple Watch Handwashing Timer Not Working

The Handwashing feature is an example of how engineering tin help us with small things that make a huge departure. Using paw motions and the sound of running tap water, your Apple Lookout man automatically detects when you are washing hands and starts a 20-second timer. However, sometimes the watchOS 7 Handwashing timer might not work correctly. To assist, allow us start with the basic solutions and eventually get this trouble fixed successfully.

1. Make Certain Handwashing is Enabled
2. Do Non Terminate Washing to Cheque the Timer
3. Restart, or Force Restart Your Apple Watch
4. Make Sure Microphone is Enabled
5. Turn ON Significant Locations
6. List Dwelling Accost in your Contact Menu
7. Remove any Cover or Protector
8. Update to the Latest Software
9. Unpair and Repair the Apple Sentry

1. Make Sure Handwashing is Enabled

By default, this handy feature is disabled. Therefore, the first step is to ensure Handwashing is turned on.

Secondly, only Apple Watch Serial 4, Serial 5, and the newest Serial 6 and SE running watchOS 7 have this option.

Note: Though Series 3 supports watchOS 7, it does not have ambient sound detection, and thus Paw Washing feature (and the Noise app) aren't available. Many publications falsely mention that Series three supports this.

2. Practice Not Stop Washing to Check the Timer

When you starting time washing your hands, the Apple tree Scout sensors read from your hand movements and the audio of flowing tap water. Soon, the 20-second Handwashing timer automatically starts displaying on the screen.

Y'all practice not have to stop washing to bank check the timer. If you do, information technology pauses and asks yous to continue. So, make certain to keep washing unremarkably. Subsequently 20 seconds, y'all will feel haptic feedback, sound (if you lot have turned these on), and besides run into a bulletin on the screen.

3. Restart, or Force Restart Your Apple tree Watch

One of the quickest fixes to solve the Handwashing trouble is to restart the Apple Watch. Switching off and then switching on the wearable takes care of several temporary glitches. In case a simple restart fails to bring success, go alee with a hard reboot.

4. Make Sure Microphone is Enabled

Handwashing uses the microphone to recognize the audio of tap water. Thus it is essential to ensure that settings for this are perfect.

1. Printing the Digital Crown and tap on the Settings icon from the chimera of apps.
2. Gyre downwards and tap on Privacy. Enter the Screen Time passcode, if asked.
3. Tap on Microphone.
4. Brand sure the toggle for Measure Sounds is enabled.

5. Turn ON Significant Locations

1. Open up the Settings app on your iPhone and tap on Privacy.
2. Tap on Location Services → System Services.
3. Ringlet down to the bottom and tap on Pregnant Locations. On the next screen, ensure the toggle for Meaning Locations is ON.

For the Handwashing reminders characteristic to work correctly, you lot must have your home address listed in your contact card. After this, Apple Picket tin remind you to wash your hands when you reach home.

1. Open the Contacts app and tap on My Carte from the top. You may likewise open the Phone app and tap on the Contacts tab.
2. Tap on Edit.
3. Tap on add together address. Fill in all the details and tap on Done.

vii. Remove any Cover or Protector

Many people use total-body encompass or case to protect their expensive Apple Sentry. Cases from reputed brands have proper cutouts for the speaker, microphone, and the sensor. However, if you lot apply a fully covered example that blocks the microphone, remove it.

Secondly, you may likewise consider cleaning the microphone using a soft, tiny brush or material. Brand sure to have extreme intendance.

viii. Update to the Latest Software

With each watchOS update, Apple tree brings issues fixes and improvements. To have the best possible user experience, you must have the latest version of watchOS on your Apple Lookout man. You tin easily update straight from your watch or follow the steps below.

1. Open the Spotter app on the companion iPhone and ensure you lot are in the 'My Watch' tab.
2. Tap on the Full general → Software Update.
3. Tap on Download and Install or Install At present if you run across either.

Note: If you are running developer or public beta of watchOS, consider switching to the regular (not-beta) version.

9. Unpair and Repair the Apple Watch

Finally, if nothing works, unpair the Apple Watch and pair it once again. This will erase everything that is currently on the sentry. However, when y'all unpair using the Watch app, it creates a backup automatically. You tin can apply it to restore and get back the current data.

Signing Off

These are some of the ways to get Handwashing working over again on your Apple tree Watch. I hope the solutions above worked for yous. Kindly share your opinion in the comments section below.

People are usually in a bustle, and this handy feature is merely a please to have. Though Handwashing was made bachelor during the pandemic, Apple tree's VP of technology, Kevin Lynch, told TechCrunch that this characteristic was in work for years!

READ NEXT:

• What is Apple Watch Family Setup and How It Works?
• How to Use the Blood Oxygen App on Apple Scout Series six
• Apple Watch Not Getting Notifications? Here Are 9 Ways to Fix It
• All Apple Watch Icon and Symbol Meanings (A Complete Guide)

I have been an Apple user for over 7 years now. At iGeeksBlog, I beloved creating how-tos and troubleshooting guides that help people exercise more with their iPhone, iPad, Mac, AirPods, and Apple Watch. In my free time, I like to watch stand up upwardly one-act videos, tech documentaries, news debates, and political speeches.

Source: https://www.igeeksblog.com/handwashing-not-working-on-apple-watch/

Share this post